Friday, March 15, 2013

Puya Mirabilis- A study in seed viability

These Puya Mirabilis seeds were sown, using my dome method, several weeks ago.
They were leftovers from late spring 2011, and sat in the hot garage last summer, until I located them.
The germination rate appears to be about 25%, and could climb higher over time.
 
All things considered, this is quite admirable, and demonstrates how well Puyas have adapted to the harsh conditions of the Andes.

Puya Mirabilis in a Planter Box

These 3 year old Puya Mirabilis were planted in this location in late Spring of 2012. Since then, they have grown quite rapidly, tolerating the full Bakersfield sun quite admirably.
They also survived several 20+ winter nights with no freeze damage.

Puya Chilensis- Year 4

The label on this Puya Chilensis has an initial date of 4-11-09, when the original seed was sown.
Since last year, it has thrived in full sun in the Bakersfield summer, as well as survived some 20+ nights this last winter, with no damage.

Thursday, February 28, 2013

Bolles Nursery, Bakersfield

Bolles Nursery now features our Puyas:

1112 Wible Rd. Bakersfield, Ca.

AND

3255 Allen Rd. Bakersfield, Ca.

Many thanks!

Thursday, August 30, 2012

Making a Neroegelia Kahili

Some species of Bromeliad reproduce by stolens. In nature, the stolens root into the ground, where they establish roots.  One can use this characteristic in cultivation, to display the plants. In this article, I will demonstrate how to build a Kahili, using very inexpensive materials.




The bromeliad species I used is Neoregelia Fireball 'Donger.'




You will need some welded wire fencing with 2" x 4" holes. You can purchase this in different widths. I chose 36" wide by 18" long to make two Kahili. The cooler pad is an inexpensive alternative to Sphagnum moss or Coco Fiber to line the inside.




Cut out the frame of the Kahili, leaving 1/2" of wire at one end. You will fold this over to fasten.





Cut a piece of cooler pad to match the frame, leaving a very small overlap. The overhanging netting will be used for the bottom to hold the potting soil.






Shape the frame and pad into a circle, fastening the 1/2" wire.
 
 
 
 
 
This is what the Kahili should look like at this stage.






Take the hanger you will use to hang the finished product, and cut off two pieces of excess wire. Weave the wire through the excess netting and bend the ends around the bottom of the Kahili.
The bottom of the Kahili should look like this.






This is what the inside should look like.





Fill the Kahili with a good quality potting soil, and attach the hanger.





The Kahili is ready for its plants.





Cut the stolens off the host plant that you wish to use on the Kahili, using a single edge razor blade. Make the cuts at a slight angle, so the pointed end can penetrate the cooler pad more easily.

Insert the stolens in a uniform pattern into the Kahili. Since Bromeliads get their moisture from the rosettes of the leaves, it may be necessary to tie the stolens against the Kahili until the roots are established.





Hang the finished product, label, water and enjoy!



Sunday, August 26, 2012

Monday, August 20, 2012

                      Our Puyas are now available at Majestic Palms Nursery in Bakersfield, Ca.
                                         7500 Rosedale Highway Bakersfield, CA 93308
                                                                 (661) 589-1073






                                                       http://www.majesticpalms.com/